焦化废水中有害物质的回收及破坏处理

对焦化厂废水的综合治理进行了讨论，介绍了当前几种先进有效的治理技术。生化处理法需对焦化废水中高浓度的酚、氰、氨先回收利用，之后与其它有害物含量较低的废水汇合进行破坏性处理；催化湿式氧化法净化效率高，流程简单；烟道气治理焦化废水可实现以废治废的目的。     

废弃电子产品的处理与回收技术

现代电子产品更新换代速度很快，废旧电脑、电池、家电等电子垃圾的数量急剧增加，由于对环境会造成严重污染，电子垃圾作为一种特殊垃圾急待处理与回收。对几种废弃电子产品的处理与回收技术进行了综合论述，并结合我国实际，提出一些建议。     

江西德兴矿集区土壤重金属污染分析

矿山开发必然对矿区及周边地区的环境造成污染。文章以江西德兴铜多金属矿山及矿集区为研究区,开展区域土壤的重金属污染研究。在德兴地区4 800 km2的范围内,系统采集土壤样品919个。同时,采用X荧光光谱法、等离子原子发射光谱法等现代测试技术,分析了土壤中重金属(As、Hg、Cd、Cr、Zn、Cu、Pb)的含量。样品中重金属As、Hg、Cd、Cr、Zn、Cu和Pb的含量变化范围分别为1.790~899,0.034~4.980,0.043~8.330,10~666,25~18 500,6~1 825,16~1 312 mg/kg。通过对样品的重金属元素含量统计分析和绘制等值线图,发现该区域土壤中存在不同程度的As、Hg、Cd、Zn、Cu和Pb重金属污染。污染区域主要分布在德兴铜钼和铅锌矿区、乐安河下游乐平附近的煤矿区、西北部的煤矿区以及南部的电化学厂附近。     

微波消解-分光光度法测定COD的研究

通过试验研究,提出了测定COD的新方法——微波消解-分光光度法。该方法准确度、精密度符合分析要求,与国标中回流法的测定结果没有显著差异。而且采用该方法测定COD可克服回流法、微波消解-滴定法及HACH-COD测定法的操作复杂、耗时长等缺点。     

珠江口沉积物重金属污染及其潜在生态危害评价

对珠江口表层沉积物中重金属的分布及富集状况进行了分析 ,并采用Hakanson潜在生态危害指数法对其生态危害程度进行了评价。结果表明 :珠江口表层沉积物中Zn、Cr、Cu、Cd等重金属含量呈现由西北渐向东南递减的变化特点 ,而Pb、As、Hg等重金属元素的含量分布无明显规律 ;这些重金属中 ,以Hg的富集程度最高 ,其余元素的富集均较低。生态危害评价显示 ,除Hg属中等危害程度外 ,其余的重金属元素均属轻微危害程度 ;珠江口表层沉积物中主要重金属污染程度的顺序为Hg >Cd >Pb >Cu >As>Cr>Zn。     

重金属离子-二乙基二硫代氨基甲酸钠螯合体系的HPLC分析方法研究

采用二乙基二硫代氨基甲酸钠(NaDDC)为螯合剂,对Cu(Ⅱ)、Hg(Ⅱ)、Pb(Ⅱ)、Zn(Ⅱ)、Cd(Ⅱ)、Cr(Ⅵ)六种重金属离子进行了螯合萃取分离体系的方法研究,用HPLC方法建立了上述金属离子的最佳分离条件及定性定量分析方法.结果表明,用C18反相柱(5μm,150×4.6mmi.d.)和流动相(V(乙腈):V(甲醇):V(水)=55:15:30)能有效分离上述重金属离子,最低检测限在0.1～1.6ng范围内,线性范围及线性关系满足定量分析要求.     

重金属在淀山湖沉积物上的吸附研究

本文以淀山湖沉积物作为研究对象 ,研究了 Cu、Zn、Pb和 Cd在淀山湖沉积物上的等温吸附和沉积物对重金属吸附的影响因素。结果表明 ,重金属 Cu、Zn、Pb和 Cd在淀山湖沉积物上的等温吸附符合 L angmuir模型 ,淀山湖沉积物对重金属饱和吸附量的大小顺序为 Zn>Cu>Pb>Cd。淀山湖沉积物的组成对重金属吸附有较大的影响 ,其中沉积物中粘粒对 Cu、Zn、Pb和 Cd的吸附最强。沉积物中有机质对 4种重金属也有较强的吸附 ,特别对 Zn的吸附最强。碳酸盐对 Zn的吸附较弱 ,而对 Cu、Pb和 Cd有较强的吸附。 p H值对重金属吸附也有较大的影响 ,吸附量随着 p H值的升高而增大。温度对吸附的影响则较小     

Past and future sustainability of water policies in Europe

The article contributes to a discussion on two global issues on water: water resources management, and water supply and sanitation. Focusing on Europe, it traces the legal roots of current systems in history: as a resource, water is considered as a common property, rather than a market good; while as a public service it is usually a commodity. Public water supply and sanitation technologies and engineering have developed under three main paradigms: quantitative and civil engineering; qualitative and chemical/sanitary engineering (both on the supply side); and the most recent one, environmental engineering and integrated management (on the demand side). The cost of public drinking water is due to rise sharply in view of the two‐fold financial challenge of replacing an ageing infrastructure and keeping up with ever‐rising environmental and sanitary quality standards. Who will pay? Government subsidies, or water users? The author suggests that apparent successes with privatisation may have relied heavily on hidden government subsidies and/or the healthy state of previously installed water infrastructure: past government subsidies are still felt for as long as the lifetime of the infrastructure. The article stresses the importance of public participation and decentralized local management of water and sanitation services. Informing and involving users in water management decisions is seen as an integral part of the ‘ethics’ side of the crucial three E's (economics, environment, ethics). The article strongly argues for municipal provision of water services, and hopes that lessons learnt and solutions found in the European experience may serve water services management efforts in other regions of the world.     

长江铜陵段表层水中重金属含量及存在形态分布研究

通过测定长江铜陵段枯、丰水期江水中cu、Pb、Zn和cd不同形态的含量,分析了4种金属在江水中的存在形态分布,不同水期含量变化,水中悬浮物对金属吸附能力大小,以及近20年来含量的变化情况。结果表明,长江铜陵段江水中各重金属总量丰水期时大于枯水期,重金属各形态含量之间均有差异:丰水期时,各金属会被悬浮物以不同的方式携带进入水体中,cu、zn、Pb以活跃态和稳定态为主,Cd以活跃态为主;枯水期时,Zn主要以溶解态和稳定态为主,Pb以稳定态方式被携带,而80％的Cu、Cd是以溶解态形式存于水中。悬浮物(丰水期)对重金属的吸附能力大小顺序为Pb>Cu>Zn>Cd。与近20年江水中的重金属背景值比较,长江铜陵段重金属含量有普遍升高的趋势。     

The economics of tire remanufacturing

The world market for tires is described to identify the current material flow from raw materials to tires and the used tire disposal problem. Then, I describe the value-adding operations in the tire production process and in the tire retreading process. Once retreading is identified as the only recovery alternative that maximizes tire utilization, I explain why heat generation is the only recovery alternative, when retreading is not technically feasible. The economic values of heat generation in electric plants and in cement kilns are discussed. The paper culminates with the case of retreading, the tire remanufacturing process and the recommendation of a simple decision rule for selecting the number of times a tire should be retreaded to maximize its utilization.